|
|
Fresh air is drawn into the home via a low energy continuous running ventilation unit, located in the roofspace/utility area of your home. The ventilation unit filters the incoming air to remove pollutants and insects. Once passed through the unit, the warm, clean, fresh, filtered
|
 |
| air is distributed arounthe home through a series of ducts which are run to each habitable room ie. living room, bedroom etc. |
The air from the wet rooms ie. bathrooms, kitchen, utility areas etc. is extracted and filtered back through the ventilation unit. This positive pressured air brought in (distributed) and negative pressured air going out (extracted) allows the air to be changed up to 3.5 times per hour in the living areas, providing balanced ventilation throughout without extract fans or open windows.
The Axco HRV system is designed to recover up to 86% of the heat normally lost through windows, trickle vents and other break-out points i.e. extractor fans in a building structure.
The air being extracted transfers its latent heat via a rotary thermal heat exchanger to the fresh air coming in, i.e. fresh, filtered air enters the home which is warmed to a level of 80% of the air outside.
With economical EC low energy fans and the Specific Fan Power (SFP) below the standard rating of 2, the system costs approximately equal to a 60watt bulb to run.
|
|
|
|
| ˆ top ˆ |
 |
| |
|
•
|
Clean, fresh air reduces symptoms for asthma and allergy sufferers
|
| • |
Excellent heat recovery provides positive enhancement of energy efficiency in the home
|
| • |
No need for trickle vents or extractor fans
|
| • |
Complete condensation control throughout
|
| • |
Constant change of air without draughts, removing indoor air pollution
|
| • |
Stops mould & mildew Quiet in operation
|
| • |
Large product range to suit all home sizes
|
| • |
Best in Class F7 air filters
|
| • |
High efficiency rotating thermal wheel exchanger
|
| • |
Controlled and monitored by a wireless digital management system measuring air temperature, humidity, rotary wheel function, fan speed, filter condition etc
|
| • |
SAP Appendix Q eligible |
| • |
Meets all Building Regulation Requirements |
| |
|
|
|
|
| ˆ top ˆ |
 |
| |
The Axco HRV system is designed to recover up to 90% of the heat normally lost through windows, trickle vents and other break-out points i.e. extractor fans in a building structure.
The air being extracted transfers its latent heat via a rotary thermal heat exchanger to the fresh air coming in, i.e. fresh, filtered air enters the home which is warmed to a level of 80% of the air outside.
With economical EC low energy fans and the Specific Fan Power (SFP) below the standard rating of 2, the system costs approximately equal to a 60watt bulb to run. |
| |
| |
|
|
|
| ˆ top ˆ |
 |
| |
| The AXCO loft mounted unit is a sophisticated whole home ventilation and condensation control unit for homes with a loft space. The unit ventilates the home from a central position on the landing in a house or the central hallway in a bungalow to transform a stagnant, stale atmosphere into a fresh, healthy, condensation free environment. |
HEALTH BENEFITS
The loft mounted P.I.V unit draws fresh air into the dwellings from outside and filters it before being delivered into the property. Moisture laden air is diluted, displaced and replaced with clean, tempered and filtered air.
This promotes free air circulation and eliminates or reduces surface condensation, which causes mould growth, providing a significant improvement in the health of asthma sufferers and general indoor air quality. |
|
| The PIV's key benefits include: |
| • |
Reduces/eliminates surface condensation
|
| • |
Quiet in operation
|
| • |
Eliminates mould
|
| • |
Stops streaming windows
|
| • |
Removes musty odours
|
| • |
Improves indoor air quality
|
| • |
Enhances heat distribution
|
| • |
Takes advantage of the benefits of solar gain
|
| • |
Benefits asthma sufferers
|
| • |
BBA Approved |
| |
|
| |
|
|
| ˆ top ˆ |
| |
| |
| |
| |
